The RAMPAGE power lift is the FASTEST, EASIEST and SAFEST way for ONE PERSON working alone to load one or even two motorcycles in the back of a pick-up or on a trailer.
 
This new design fits into most full-size or compact pick up truck beds and even has the ability to be installed in very short bed trucks as short as 60"

RAMPAGE is precision welded utilizing tooled fixtures. It is made from 1/8 inch thick, high quality carbon steel. And, the black powder coated finish provides long lasting rust protection.

RAMPAGE has drainage slots along lower track to keep tracks clear of moisture and debris.

RAMPAGE uses maintenance-free HMW nylon rollers. No lubrication is required.

RAMPAGE comes complete with All Weather 12v 2500 pound electric winch and cable remote control switch. Flip the switch and watch your motorcycle load - safely, easily. Also included is an all weather cable - one end plugs into a socket on the RAMPAGE, the other has 2 ring terminals that connect to the truck's battery.

RAMPAGE can be installed in beds up to 40" above the ground.

RAMPAGE installs easily. The Standard lift is 95" long, and 24" wide. Front tire cradle is 6" wide and sits 7" above truck bed. A bar is attached with two bolts through the floor and bed frame at the front of the truck bed. For all pickups, 3 holes are drilled through the floor and bed frame. Route the all weather cable from this bar, to the truck's battery. The pre-assembled lift together with the winch motor is then slid into the truck bed and attached to the bar with two additional .5" bolts. Plug into the quick disconnect and you're ready to go. When in use, the tailgate must be removed on 8 foot beds and placed in the down position on shorter beds. Heavy duty design supports the entire weight on the ramp structure and does not place any significant load on the tailgate. Complete instructions are included with each lift.

RAMPAGE Singles can now be set side by side to make into a Double (Requires a custom frame to lift the set up over the wheel wells.

RAMPAGE removes easily. Simply, unbolt the four .5" attach bolts, unhook the quick disconnect power cable and slide the assembled lift from the bed of your truck. Convenient rear wheels allow roll-away capability. Additionally, unit can be removed by one person in 3 pieces of 55 Lbs, 110 Lbs and 135 Lbs. The two large pieces can be moved easily using the rollers on the end as dolly wheels.